Auzoer WDC Dust Collector For Metal and Laser Welding Fume Extraction
Product Description
1. Mobile /welding /Suction Arm Dust Collector consists of suction arm, filter cartridge, ash cleaning system and fan.
2.The fan provides power source for WDC. Under the action of the fan, the dusty gas enters and enters WDC through the air inlet.
3. Under the action of filter cartridge, dust is intercepted outside the filter cartridge, and clean air is discharged from the inside of the filter cartridge to the outside of WDC.
4. After a long period of work, the filter cylinder accumulates a large amount of dust. At this time, the ash removal system begins to work, and high-pressure gas is ejected for ash removal.
5. Dust is blown down by high pressure gas and collected only by grey drawer for centralized collection.
| WDC Technical Data |
| Model | Dimension | Valve Quantity | Filter Quantity | Filter Size | Weight(kg) |
| Length(mm) | Width(mm) | Height(mm) |
| WDC1200 | 560 | 850 | 1180 | 1 | 1 | φ324X660 | 86 |
| WDC2000 | 710 | 880 | 1480 | 2 | 2 | φ356X660 | 100 |
Perfect design, compact size with large energy
1. It can move freely according to the different pollution stations.
2. The suction arm can be freely positioned, it is convenient and durable;
3. Double maintenance door design, fully consider the convenience of maintenance.
4. With ash cleaning system, it is easy to remove dust and ensure the low resistance operation of the dust collector.
5. Convenient transportation and installation.
The high efficiency fan owns the advantages of small volume, low power consumption, large air volume and low noise.
1. 1.5KW air volume can reach 1200M/H;
2. the noise is below 76dB;
3. CFD simulated operation to narrow the gap between design and actual performance.
The flow field layout is optimized to ensure the capture effect.
1. There is no eddy current within the control scope and the gas flow direction is uniform;
2. Large capture range, same air volume and good capture effect.
