
Add to Cart
Product Description:
1. US made ultra fine filter material for high filtering efficiency
2. Wide pleat design, large filtering area
3. Anti-rust galvanized cap.
4. Galvanized keel with diamond mesh, higher rate of opening pinhole
5. Elastic neoprene gasket ring
6. Good moisture proof ability
Scope of Application
Suitable for large air separation facility in oxygen factory, inlet air filter of large compressor, blast furnace blower. Replacement of the same products of different brands such as Donaldson, GE, AAF, Nordic, etc.
Specification
Model | Top end cap OD | Bottom end cap OD | Top end cap ID | Installation hole | Height | Filtration area | Filter Precision | Rated air flow | Initial resistance |
mm | mm | mm | mm | mm | ㎡ | μm | m³/h | Pa | |
AU-WF3266 | 324 | 324 | 213 | 14 | 660 | 18 | 1-2 | 800 | 80-100 |
AU-WF3275 | 324 | 324 | 213 | 14 | 750 | 21 | 1-2 | 900 | 80-100 |
AU-WF32100 | 324 | 324 | 213 | 14 | 1000 | 27 | 1-2 | 1200 | 80-100 |
• 100 % Spunbonded Polyester
• HO Treated Polyester (repels both water and oil)
• Aluminized Spunbonded Polyester
• PTFE Membrane
• Anti-Static Membrane
• 80/20 Paper - Polyester Blend
• High Temperature Fiber Felt
• High Temperature Membrane